DailyChek HL568AA, Руководство пользователя

Страница: 19 / 48

19
Get Ready for Testing
Code Setting
There are 2 options for you to complete the code settings.
1. Under Standby Mode, press and hold MODE button to enter the
Setting Mode. Follow the above Pre-setting steps to enter the Code
Setting Mode and complete the code setting.
2. Insert a test strip into the meter. When the code number or the
symbol appears on the screen, press MODE button to enter the
Code Setting Mode and follow the above step 6 to complete the
code setting.
A. Press SET button to select the
correct number and MODE button
to confirm the selection. Then
single-digit starts
fl ashing.
B. Repeat the step A to complete the
code setting.
C. Press MODE button to con fi rm the
number that matches the code
number on your test strip vial.
NOTE
Make sure the code on the meter is the
same as the code on the test strip vial
each time before you test. Test results
may not be accurate if the code number
displayed on the meter does not match
that printed on the strip vial.
The ten-digit number starts fl ashing.
5