• VRV
®
Systems • Indoor Units
141
• Indoor Units • CONCEALED CEILING UNIT • FXMQ-PVE
6
Dimensional drawing & centre of gravity
6 - 1 Dimensional drawing
FXMQ100,125P
3D060162
12 Drain hose (accessory)
O.D. ø 32 (outlet)
11 Socket (for maintenance)
VP25 (O.D. ø 32 /I.D. ø 25)
10 Hook
For M10
9
Air suction flange
8
Air discharge flange
7
Power supply connection
6
Interunit wiring connection
5
Control box (inside)
4
Ground terminal (in control box)
M4
3
Drain pipe connection
VP25 (O.D. ø 32 /I.D. ø 25)
2
Gas pipe connection
ø 15.9 flale connection
1
Liquid pipe connection
ø 9.5 flale connection
ITEM PART NAME
REMARK
40-ø 4.7 hole
(All around)
(Suspention bolt position)
Air Outlet
48-ø 4.7 hole
(All around)
or less
Air Inlet
20 - 8x12 oblong hole
(All around)
450 or mo
re
(s
ervi
ce
space)
700 or more
(service space)
View
(From the Air Outlet)
Inspection hatch 450 or more
700 or Less
Adj
ustabl
e
(467 or m
ore)
Air outlet
Ceiling
Floor surface
30
0 or mor
e
Air Inlet
(Note 2)
(N
ot
e 4)
2500 o
r more
(A
case wi
thout the
ce
ilin
g)
20 - 8x12 oblong hole
(All around)
(From the air inlet)
300 or less
Fig. A
View B-1
View B-2
Inspection hatch 2
Air
outlet
Air
inlet
Control box
<Inspection hatch>
(Ceiling opening)
Control box
Inspection hatch
Ceiling
Inspection hatch
Ceiling
Inspection hatch (450mmx450mm)
Inspection hatch (°450)
Control box
Control box
Control box
Inspection hatch 3
or
more
or
le
ss
or
m
or
e
or more
NOTES
1
Location of MANUFACTURE’S LABEL:
Control box surface
2
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
3
Do not locate things should not be wet under the
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
4
Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
FXMQ100,125P
3D060162
12 Drain hose (accessory)
O.D. ø 32 (outlet)
11 Socket (for maintenance)
VP25 (O.D. ø 32 /I.D. ø 25)
10 Hook
For M10
9
Air suction flange
8
Air discharge flange
7
Power supply connection
6
Interunit wiring connection
5
Control box (inside)
4
Ground terminal (in control box)
M4
3
Drain pipe connection
VP25 (O.D. ø 32 /I.D. ø 25)
2
Gas pipe connection
ø 15.9 flale connection
1
Liquid pipe connection
ø 9.5 flale connection
ITEM PART NAME
REMARK
40-ø 4.7 hole
(All around)
(Suspention bolt position)
Air Outlet
48-ø 4.7 hole
(All around)
or less
Air Inlet
20 - 8x12 oblong hole
(All around)
450 or mo
re
(s
ervi
ce
space)
700 or more
(service space)
View
(From the Air Outlet)
Inspection hatch 450 or more
700 or Less
Adj
ustabl
e
(467 or m
ore)
Air outlet
Ceiling
Floor surface
30
0 or mor
e
Air Inlet
(Note 2)
(N
ot
e 4)
2500 o
r more
(A
case wi
thout the
ce
ilin
g)
20 - 8x12 oblong hole
(All around)
(From the air inlet)
300 or less
Fig. A
View B-1
View B-2
Inspection hatch 2
Air
outlet
Air
inlet
Control box
<Inspection hatch>
(Ceiling opening)
Control box
Inspection hatch
Ceiling
Inspection hatch
Ceiling
Inspection hatch (450mmx450mm)
Inspection hatch (°450)
Control box
Control box
Control box
Inspection hatch 3
or
more
or
le
ss
or
m
or
e
or more
NOTES
1
Location of MANUFACTURE’S LABEL:
Control box surface
2
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
3
Do not locate things should not be wet under the
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
4
Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
FXMQ-P
3D028952
Cord oulet hole
Staple
EXPOSED BODY, EXPOSED CORD
Remote control
• REMOTE CONTROL DIMENSIONS
• INSTALLATION METHOD
N
OTE
1
Remote control cord and staple are not attached. They are field
supplied parts.
• Specifications of cord
For Australia
For other countries
Type
Shield wire
(insulated thickness: 1mm or more)
Vinyl cord with sheath or cable
(insulated thickness: 1mm or more)
Size
0.75~1.25mm²
Total
length
500m
EXPOSED BODY, EMBEDDED CORD
EXPOSED BODY, EMBEDDED CODE
Remote control
(Between
remote control
and control box)
Control box
Remote control
Through hole
Conduit
