Daikin Super Unit SUT00S8007-30, Руководство по эксплуатации

Страница: 93 / 95

PIM00424
14-1
Chapter 14 Output Signal Timing Chart
About the start-stop signal (digital input 0), the setting value of [P11: start-stop signal switching] is "1" (default).
If the setting value of [P11: start-stop signal switching] is changed to "0", the ON and OFF of the start-stop signal
(digital input 0) will be inverted.
14.1
Timing chart when the power is turned on
14.1.1
When the setting value of "P08: Alarm output mix" is "0" or "2"
detection(*1)
DIN1
(Start-Stop
Signal)
Power
(200V)
Charge Normal status
At most 3sec
OFF：Operation commnad ON：Stop commnad
OFF ON
Actual pressure
Unit operation
Display
DO2
(Total output)
Digital
input
Digital
output
Magnetic pole
Operation
waiting
0.2sec
on average
14.1.2
When the setting value of "P08: Alarm output mix" is "1"
Actual pressure
Normal status
Magnetic pole
Operation
Charge
At most 3sec
ON：Stop commnad OFF：Operation commnad
Power
(200V)
OFF ON
Unit operation
Display
(Start-Stop
Signal)
DIN1
AL̲A
(
:Integrated output
)
Digital
input
Digital
output
waiting
0.2sec
on average
detection(*1)
*1 Magnetic pole detection is performed only when the motor start at the first time after turning on the power.