20
TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off at
night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
Check that the clock is correct.
•
If not, set the clock to the present time.
Page 9
Press
1.
.
” is displayed.
” blinks.
“
“
Press
2.
until the time setting reaches the point
you like.
Each pressing of either button increases or decreases the time setting by 10 minutes. Holding
•
down either button changes the setting rapidly.
Press
3.
again.
The TIMER lamp lights up.
•
Display
To cancel OFF TIMER operation
Press
.
The TIMER lamp goes off.
•
NOTE
Notes on TIMER operation
When TIMER is set, the present time is not displayed.
•
Once you set ON/OFF TIMER, the time setting is kept in the memory. (The memory is canceled when remote controller batteries are replaced.)
•
When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum
•
approximately 10 minutes)
NIGHT SET mode
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C) down in
•
HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
01_EN_3P232717-3D.indd 20
01_EN_3P232717-3D.indd 20
10/6/2009 9:21:16 AM
10/6/2009 9:21:16 AM
