manualshive.com logo in svg

Daikin Super Multi NX B series, Руководство по обслуживанию, Страница: 150 / 302

Поделиться
Скачать
Daikin Super Multi NX B series Скачать руководство пользователя страница 150

Si12-308

Instruction

System Configuration

139

2.7

POWERFUL Operation

POWERFUL Operation

POWERFUL operation quickly maximizes the cooling 
(heating) effect in any operation mode. You can get the 
maximum capacity .

■

To start POWERFUL 
operation

1. Press “POWERFUL button”.

• POWERFUL operation ends in 20 minutes.  

Then the system automatically operates 
again with the settings which were used 
before POWERFUL operation.

• When using POWERFUL operation, 

there are some functions which are not 
available.

■

To cancel POWERFUL 
operation

2. Press “POWERFUL button” 

again.

NOTE

■

■

■

■

Notes on POWERFUL operation

•

In COOL and HEAT mode

To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased 
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.

•

In DRY mode

The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.

•

In FAN mode

The air flow rate is fixed to the maximum setting.

•

When using priority-room setting

See “Note for multi system”.

TEMP

ON/OFF

POWERFUL

HOME LEAVE

MODE

TIMER

FAN

SWING

SILENT

SENSOR

ON

CANCEL

OFF

O N

1, 2

Содержание Super Multi NX B series















































































































































































































































































































Отзывы:

Нет отзывов