manualshive.com logo in svg

Daikin SkyAir RZQ-P Series, Инженерные данные

Daikin SkyAir RZQ-P Series - это мощная серия сплит-систем от Daikin, идеально подходящая для коммерческих помещений. Вам необходима инженерная документация для установки и обслуживания? Скачайте бесплатно руководство по эксплуатации на manualshive.com и получите всю необходимую информацию для работы с вашим оборудованием.

Поделиться
Скачать
background image

Installation of indoor unit

EDUS281120_a

190

RZR-P, RZQ-P(9)

3PN14093-12A

4

English

2-3

OPTIONAL ACCESSORIES

• These is one type of remote controller: wired.

NOTE

• If you wish to use a remote controller that is different from the 

above, select a suitable remote controller after consulting 
catalogs and technical materials.

FOR THE FOLLOWING ITEMS, TAKE SPECIAL 
CARE DURING CONSTRUCTION AND CHECK 
AFTER INSTALLATION IS FINISHED.

a. Items to be checked after completion of work

Also review the “SAFETY CONSIDERATIONS”.

b. Items to be checked at time of delivery

c. Points for explanation about operations

2-4

NOTE TO INSTALLER

• Be sure to instruct customers how to properly operate the 

unit (especially cleaning filters, operating different functions, 
and adjusting the temperature) by having them carry out 
operations themselves while looking at the manual.

3.

SELECTING INSTALLATION SITE

〈

Hold the hanger brackets in the case of moving the indoor 

and outdoor units at the time of and after opening the pack-
ages. Do not impose undue force on other parts, such as 
the refrigerant piping, drain piping, or flanges, in particu-
lar.

〉 

〈

Add heat insulation material to the indoor unit if the tem-

perature above the ceiling is likely to exceed 86°F and a rel-
ative humidity of 80%.

〉 

〈

Make sure that the insulation material is made of glass wool 

or polyethylene foam, has a minimum thickness of 3/8 in., 
and can be accommodated in the opening on the ceiling.

〉 

(1) Select an installation site where the following conditions are 

fulfilled and that meets with your customer’s approval.

• A place where cool (warm) air is delivered to the entire 

room.

• Where nothing blocks the air passage.
• Where condensate can be properly drained.
• If supporting structural members are not strong enough 

to take the unit’s weight, the unit could fall out of place 
and cause serious injury.

• Where the false ceiling is not noticeably on an incline.
• Where there is no risk of flammable gas leakage.
• Where sufficient clearance for maintenance and service 

can be ensured. 

(Refer to Fig. 2-1)

• Where piping between indoor and outdoor units is possi-

ble within the allowable limit. (Refer to the installation 
manual of the outdoor unit.)

Items to be checked

If not properly done, what is 
likely to occur.

Check

Are the indoor and outdoor 
unit fixed firmly?

The units may drop, vibrate 
or make noise.

Was the installation of the 
outdoor unit completed?

The unit may malfunction or 
the components burn out.

Is the gas leak test 
finished? 

No cooling or heating.

Is the unit fully insulated? 
(Refrigerant piping, drain 
piping, and duct)

Condensate water may drip.

Dose drainage flow 
smoothly?

Condensate water may drip.

Does the power supply volt-
age conform to the indica-
tion on the name plate?

The unit may malfunction or 
the components burn out.

Are wiring and piping 
correct?

The unit may malfunction or 
the components burn out.

Is the air conditioner prop-
erly grounded?

Dangerous in case of cur-
rent leakage.

Is wiring size according to 
specifications?

The unit may malfunction or 
the components burn out.

Is something blocking the 
air outlet or inlet of either 
the indoor or outdoor units?

No cooling or heating.

Did you set the external 
static pressure? 

No cooling or heating.

Are refrigerant piping length 
and additional refrigerant 
charge noted down?

The refrigerant charge in 
the system is not clear.

Did you check that no wiring 
connection screws were 
loose?

Electric shock or fire.

Items to be checked

Check

Are you sure the control box cover, air filter, air inlet grille, 
and air outlet grille are mounted?

Did you explain about operations while showing the opera-
tion manual to your customer?

Did you deliver the operation manual along with the instal-
lation manual to the customer?

Did you explain the customer the handling and cleaning 
methods of the field supplies (e.g., the air filter, air inlet 
grilles, and air outlet grille)?

Did you deliver instruction manual, if any, for the field sup-
plies to the customer?

The items with 

WARNING and 

CAUTION marks in the operation 

manual are the items pertaining to possibilities for bodily injury and 
material damage in addition to the general usage of the product. 
Accordingly, it is necessary that you make a full explanation about the 
described contents and also ask your customers to read the opera-
tion manual.

Содержание SkyAir RZQ-P Series















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SkyAir RZQ-P Series

Panasonic U-72MF1U9 Installation Instructions Manual preview
U-72MF1U9
Бренд: Panasonic Страницы: 56
Panasonic U-16GE2E5 Test Run Manual preview
U-16GE2E5
Бренд: Panasonic Страницы: 60
Panasonic U-26PE1U6 Technical Data & Service Manual preview
U-26PE1U6
Бренд: Panasonic Страницы: 297
Kaden KW Series Owner'S Manual preview
KW Series
Бренд: Kaden Страницы: 24
Daikin FDQ125C7VEB Installation Manual preview
FDQ125C7VEB
Бренд: Daikin Страницы: 16
Hiyasu AKH9U Operating Manual preview
AKH9U
Бренд: Hiyasu Страницы: 14
Friedrich VERT-I-PAK B-SERIES Installation & Operation Manual preview
VERT-I-PAK B-SERIES
Бренд: Friedrich Страницы: 20
GE AZ61H15EAD Owner'S Manual & Installation Instructions preview
AZ61H15EAD
Бренд: GE Страницы: 72
Evolar EVO-3008CH Manual preview
EVO-3008CH
Бренд: Evolar Страницы: 49
Daikin Split Comfora R32 Service Manual preview
Split Comfora R32
Бренд: Daikin Страницы: 164
Vaillant climaVAIR V 7-025 NW User Manual preview
climaVAIR V 7-025 NW
Бренд: Vaillant Страницы: 26
Vertiv Liebert CRV Plus User Manual preview
Liebert CRV Plus
Бренд: Vertiv Страницы: 98
Air Oasis iAdaptAir Quick Start Manual preview
iAdaptAir
Бренд: Air Oasis Страницы: 2
Mach Power HC-SWAP50 User Manual preview
HC-SWAP50
Бренд: Mach Power Страницы: 14
Mestek HWL2-1116 Installation, Operation & Maintenance Manual preview
HWL2-1116
Бренд: Mestek Страницы: 58
Bard WA605 Installation Instructions Manual preview
WA605
Бренд: Bard Страницы: 21
Samsung HH175EZM Service Manual preview
HH175EZM
Бренд: Samsung Страницы: 86
Samsung DH052EAMG Service Manual preview
DH052EAMG
Бренд: Samsung Страницы: 84

Бренды по названию

Популярные бренды

Загрузить еще бренды