Daikin RZQG71~140L7V1B, Руководство по обслуживанию

Страница: 140 / 279

ESIE12-06 Field Setting from Remote Controller
Field Setting 129
2.3 Settings Contents and Code No. for Indoor Units
Note: 1. Settings are made simultaneously for the entire group, however, if you select the mode No.
inside parentheses, you can also set by each individual unit. Setting changes however
cannot be checked except in the individual mode for those in parentheses. (Even if the
setting are made for the entire group, the display always indicates "01".)

2. For FHQG, the second code No. of the "Airflow range setting is set at "03".
3. "88" may be displayed to indicate the remote controller is resetting when returning to the
normal mode.
2.3.1 Detailed Explanation of Setting Modes
Filter Cleaning Sign Interval
When "Display" is selected in "Filter cleaning sign" after the unit runs for certain time, "Filter
cleaning" will be displayed on the remote controller. This setting is used when the display
interval of "Filter cleaning" needs to be changed on occasions such as when the filter has been
heavily contaminated.
Remote Controller Thermistor
Select the thermistor to control room temperature.
The factory setting for the Second Code No. is "02" and room temperature is controlled by the
indoor unit suction air thermistor.
When the Second Code No. is set to "01", room temperature is controlled by the indoor unit
suction air thermistor and the room temperature thermistor in remote controller as following
figures.
Mode
No.
First
Code
No.
Description of Setting
Second Code No.
01 02 03 04
10 (20)
0 Filter cleaning sign interval Long life filter 2,500 hrs. 1,250 hrs. — —
2 Remote controller thermistor Enabled Disabled — —
3 Filter cleaning sign Display No display — —
11 (21)
2 Fan OFF at Thermostat OFF Normal OFF — —
3 Airflow rate setting during heating Standard Slightly up Up —
4 Automatic operation mode control Available Prohibition — —
12 (22)
3 Fan speed heating thermostat OFF LL-speed Set-speed — —
5 Automatic restart after power failure reset Disabled Enabled — —
6 Fan speed cooling thermostat OFF LL-speed Set-speed — —
13 (23)
0
High air outlet velocity (for high ceiling
applications)
Standard Slightly up Up —
1 Selection of airflow direction 4-way flow 3-way flow — —
4 (

2) Airflow range setting Upper Normal Lower —
15 (25) 5 Individual setting of ventilation Normal
Individual
operation
— —
Mode No. First Code
No.
Second
Code No.
Long Life Filter Setting
10 (20) 0
01 2,500 hrs. Contamination Light
02 1,250 hrs. Contamination Heavy
Mode No.
First Code
No.
Second
Code No.
Thermistor that controls room temperature
10 (20) 2
01
Room temperature thermistor in remote controller and
indoor unit suction air thermistor
02 Indoor unit suction thermistor