3
|
Components
Service manual
93
RXQ25+3 3 3
35AMV1B
Split Sensira R32 BBOP
ESIE21-16 – 2022.02
a
b
a
Nut
b
Propeller fan blade assembly
3
Pull and remove the propeller fan blade assembly from the DC fan motor
assembly.
INFORMATION
Use a pulley remover if the propeller cannot be removed manually.
4
To install the propeller fan blade assembly, see
To remove the DC fan motor assembly
1
Remove the propeller fan blade assembly from the DC fan motor assembly,
see
2
Disconnect the DC fan motor connector from the main PCB.
3
Unlock the ferrite bead.
4
Cut the tie strap.
5
Detach the DC fan motor harness from the switch box.
6
Slightly bend the harness retainers to detach the DC fan motor harness.
7
Remove the 4 screws that fix the DC fan motor assembly.
8
Remove the DC fan motor assembly from the unit.
9
To install the DC fan motor assembly, see
92].
To install the DC fan motor assembly
1
Install the DC fan motor assembly in the correct location.
2
Fix the DC fan motor assembly to the unit by tightening the screws.
3
Route the DC fan motor harness through the harness retainers and bend the
harness retainers to attach the DC fan motor harness.
4
Attach the DC fan motor harness to the switch box.
5
Install a new tie strap to fix the DC fan motor harness to the switch box.
6
Connect the DC fan motor connector to the connector on the main PCB.
7
Lock the ferrite bead.
8