14
FA ROTEX Solaris RPS4 -
04/2016
4
x
Peak output
2. To ensure reliable tension relief, all cables should be run
through the respective labyrinths.
4. Insert the plug at the edge of the board on the controller, at
position TK (2-pin, see fig. 4-24).
5. Insert the control unit into its fixing bracket from above.
– Make sure that the cable loops (as shown in fig. 4-28 and
fig. 4-29) point downwards.
6. Cabling of the solar operating pump P
S
:
– Connect the pump cable to the solar operating pump P
S
.
7. Run the control cables along the return pipe and fix them with
cable ties.
Fig. 4-26 Work step 2
3. Connect the collector
temperature sensor cable
(integrated into the
connecting cable) to the
plug.
Fig. 4-27 Work step 3
Fig. 4-28 Basic wiring: FlowSensor for storage cylinder, return flow, and
collector, pump supply, mains supply
Fig. 4-29 Work step 5
Fig. 4-30 Work step 6
Fig. 4-31 Work step 7
