Daikin homecontrols EKRUFHT61V3, Инструкция по установке и эксплуатации

Страница: 18 / 28

18
Start-up
6.4 Connecting further DHC accessories
Read this entire section before starting to connect other
accessories.
To integrate the DHC Floor Heating Controller into your ecosystem and
enable it to communicate with other accessories, you must connect them
first.
You can connect the DHC Floor Heating Controller to the DHC Access
Point via the ONECTA app. It is also possible to create a direct connection
to other accessories. This means you cannot use the ONECTA app. For
further information on direct connection to other DHC accessories, see the
DHC Application Guide.
6.4.1 Connecting to the DHC Access Point via the ONECTA app
First set up your DHC Access Point via the ONECTA app to enable
operation of other DHC accessories within your ecosystem. For
further information, see the manual of the DHC Access Point.
To connect the DHC Floor Heating Controller to the DHC Access Point,
proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol.
3. Select the menu item Add Daikin Home Controls .
4. Select Add DHC Accessory .
5. Briefly press the system button (A)
(see figure 7)
.
» The LED quickly starts flashing orange. Connection mode
remains activated for 3 minutes.