Daikin homecontrols EKRUFHT61V3, Инструкция по установке и эксплуатации

Страница: 13 / 28

13
Mounting
Cable bushings
(see figure 2)
:
(J) Cable bushing 1
(K) Cable bushing 2
(L) Cable bushing 3
5 Mounting
You can flexibly mount the DHC Floor Heating Controller to a wall, using the
supplied screws and plugs, or to a DIN rail.
5.1 Screw mounting
To mount the DHC Floor Heating Controller using screws, proceed as
follows:
1. Select a suitable mounting location close to your heating
system.
Make sure that no electricity or similar lines run in the wall at this
location!
2. Use a pen to mark the positions of the two screw holes (with
a distance of 13.6 cm) on the wall
(see figure 3)
.
3. Use an appropriate drill to make the holes.
4. Use the supplied screws and plugs to fix the DHC Floor
Heating Controller
(see figure 3)
.