Daikin FXMQ-MF, Инженерные данные

Страница: 23 / 34

Installation EDUS39-900-F10
22 FXMQ-MF
Installation
Unit Installation
Installin g optional accessories before installin g the unit is easier. See the installation manuals included with the
optional accessories.
As for the parts to be used for installation w ork, be sure to use the provided accessories and specified parts designated
by our company.
1. Temporarily install the unit.

Mount the hanger brackets to suspension bolts. Secure the hanger brackets on the top and the bottom w ith nuts
<1>~<3> (M10, field supplied) and w ashers (M10, accessory 10)).
2. Adjust the height of the unit w ith the nut <2>.
(Refer to Fi g . 4)
3. Make sure the unit is level.

Use a level or a vinyl tube filled w ith w ater to make sure that the unit is level and that the tilt (do w n w ard slope) to the
drain socket and air inlet side is w ithin 1°.
(Refer to Fi g . 5)
4. Tighten both upper and lo w er nuts <1>, <3>.
(Refer to Fi g . 4)
5. Insulate the four hanger brackets w ith the sealing pad. (accessory 6)) Insulate the
hanger brackets so that the surface and edges of the hanger brackets cannot be
seen.
(Refer to Fi g . 6)
CAUTION
Setting the unit at an angle opposite to the drain socket or air inlet side might cause leaks.
N ut <1>
(Field supply)
N ut <2>
(Field supply)
N ut <3>
(Field supply)
Washer
(accessory 10))
Hanger bracket
(attached
w ith main body)
Main body
Fi g . 4
Level
Drain socket
V inyl tube
Hanger bracket
setting bolt
1˚ or less 1˚ or less
Air inlet side
Air inlet side
Drain
socket
Drain
socket
Fi g . 5
Fi g . 6
Sealing pad 6)
Slit of
sealing
pad
Hanger
bracket