Daikin FXHQ32AVEB Скачать руководство пользователя страница 4

3

English

2. BEFORE INSTALLATION

When unpacking and moving the indoor unit after unpacked, do not apply force to the piping (refrig-
erant and drain) and resin parts.

Make sure to check in advance that the refrigerant to be used for installation work is R410A.
(The air conditioner will not properly operate if a wrong refrigerant is used.)

For installation of the outdoor unit, refer to the installation manual attached to the outdoor unit.

Do not throw away the accessories until the installation work is completed.

After the indoor unit is carried into the room, to avoid the indoor unit from getting damaged, take measures 
to protect the indoor unit with packing materials.
(1) Determine the route to carry the unit into the room.
(2) Do not unpack the unit until it is carried to the installation location.

Where unpacking is unavoidable, use a sling of soft material or protective plates together with a rope 
when lifting, to avoid damage or scratches to the indoor unit.

Have the customer actually operate the air conditioner while looking at the operation manual.
Instruct the customer how to operate the air conditioner (particularly cleaning of the air filters, operation pro-
cedures, and temperature adjustment).

For selection of installation location, use the installation pattern paper (used in common with the packing 
case.) as reference.

Do not use the air conditioner where in the salty atmosphere such as coastal areas, vehicles, vessels or the 
voltage fluctuation is frequent such as factories.

Take off static electricity from the body when carrying out wiring and the control box lid is removed. 
The electric parts may be damaged.

2-1 ACCESSORIES

Check if the following accessories are attached to the indoor unit.

Name

(1) Drain hose

(2) Metal clamp

(3) Washer for hanger

(4) Clamp

Quantity

1 pc.

1 pc.

8 pcs.

7 pcs.

Shape

Name

(5) Installation pattern 

paper

Joint insulating 

material

Sealing material

(10) Resin bushing

Quantity

1 sheet

1 each

1 each

1 pc.

Shape

(6) For gas piping

(7) For liquid piping

(8) Large

(9) Small

Name

(11) Wiring fixture

(12) Screw for wiring fixture

(Miscellaneous)

Operation manual

Installation manual

Declaration of for-
mity

Quantity

2 pcs.

2 pcs.

Shape

M4 × 12

01_EN_3P249378-8N.fm  Page 3  Saturday, September 29, 2012  3:02 PM

Содержание FXHQ32AVEB






























Отзывы: