En
gl
is
h
12
STEP 8
-
After the Heat Exchanger is completely removed from the unit, turn around the Heat Exchanger for 180
û
(X-Axis).
X
Y
Z
WATER INLET
STEP 6
-
Slowly lift the Heat Exchanger from the Hairpin Side
upwards and also at the same time gently pull the Side
Panel outwards just enough to allow the Hairpin move
out and not touching the Side Panel.
MOVE UPWARDS
STEP 7
-
While holding Heat Exchanger, gently move out the
Heat Exchanger Distributor from the Side Panel.
Please be aware of the release valve that is located
at the Heat Exchanger Distributor while conducting
this step.
HEAT EXCHANGER-
HAIRPIN SIDE
GENTLY PULL
OUTWARDS
WATER OUTLET
TOP PANEL
TURN 180
û
STEP 5
- Unscrew the Control Box Right Side Panel to the Left Side Panel and screw.
TO LEFT
FROM RIGHT
CONTROL
BOX
CONTROL
BOX
