5
■
Outdoor Unit
■
Indoor Unit
1. Titanium apatite photocatalytic
air-purifying filter:
• These filters are attached to the inside of
the air filter.
2. Air outlet
3. Display
4. Front panel
5. Louvers (vertical blades):
(page 12.)
• The louvers are inside of the air outlet.
6. Air inlet
7. Air filter
8. Flap (horizontal blade):
(page 12.)
9. OPERATION lamp (green)
10. TIMER lamp (yellow):
(page 17.)
11. Indoor Unit ON/OFF switch:
• Push this switch once to start operation.
Push once again to stop it.
• The operation mode refers to the following
table.
• This switch is useful when the remote
controller is missing.
12. Model name plate
13. Signal receiver:
• It receives signals from the remote
controller.
• When the unit receives a signal, you will
hear a short beep.
• Operation start ........ beep-beep
• Settings changed ..... beep
• Operation stop.......... long beep
14. Air outlet selection switch:
(page 13.)
15. Room temperature sensor:
• It senses the air temperature around the unit.
■
Outdoor Unit
16. Air inlet:
(Back and side)
17. Refrigerant piping and inter-unit wiring
18. Drain hose
19. Earth terminal:
• It is inside of this cover.
20. Air outlet
21. Outdoor temperature sensor (back)
22. Model name plate
Appearance of the outdoor unit may differ from some models.
17
18
22
19
20
16
21
Mode
Temperature
setting
Airflow rate
COOL
22°C
AUTO
AUTO
25°C
AUTO
01_EN_3P278434-4C.fm Page 5 Thursday, August 18, 2016 11:22 AM