![background image](http://html1.mh-extra.com/html/daikin/fvxs35kv1a/fvxs35kv1a_operation-manual_4703969023.webp)
21
8. Press “SELECT button” to
select the desired temperature.
• The temperature can be set between
10°C and 32°C.
Cooling: The unit operates at 18°C even
if it is set at 10 to 17°C.
Heating: The unit operates at 30°C even
if it is set at 31 to 32°C.
• To return to the time setting, press
“BACK button”.
• The set temperature is only displayed
when the mode setting is on.
9. Press “NEXT button”.
• Be sure to direct the remote controller
toward the indoor unit and check for a
receiving tone and flashing the
OPERATION lamp.
• The temperature will be set and go to
the next reservation setting.
• To continue further settings, repeat the
procedure from STEP
2
.
• The TIMER lamp lights yellow.
10.Press “
button” to
complete the setting.
• “
” is displayed on the LCD and
WEEKLY TIMER operation is activated.
• A reservation made once can be easily
copied and the same settings used for another day of the week.
Refer to
. (page 22.)
NOTE
■
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller first.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER
mode) can be set with WEEKLY TIMER. Other settings for ON TIMER are based on the
settings just before the operation.
• Both WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The
ON/OFF TIMER operation has priority if it is set while WEEKLY TIMER is still active. The
WEEKLY TIMER will go into standby state, and “
” will disappear from the LCD.
When ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Only the time and set temperature set with the weekly timer are sent with the “
button”.
Set the weekly timer only after setting the operation mode, the fan strength, and the fan
direction ahead of time.
• Shutting the breaker off, power failure, and other similar events will render operation of the
indoor unit’s internal clock inaccurate. Reset the clock. (page 8.)
• The “BACK button” can be used only for the time and temperature settings.
It cannot be used to go back to the reservation number.
9
10
8
Copy mode
01_EN_3P278434-4C.fm Page 21 Thursday, August 18, 2016 11:22 AM