12
Adjusting the Air
fl
ow Direction
You can adjust the air
fl
ow direction to increase your comfort.
Adjusting the upper and lower air
fl
ow direction
To adjust the
fl
ap (horizontal blade)
Press
1.
.
“
•
” is displayed on the LCD and the
fl
ap will begin to swing.
When the
fl
ap has reached the desired position,
2.
press
once more.
The
fl
ap will stop moving.
•
“
•
” disappears from the LCD.
Adjusting the right and left air
fl
ow direction
To adjust the louvers (vertical blades)
Hold the knob and move the louvers.
(You will
fi
nd a knob on the left-side and the right-side blades.)
NOTE
Note on
fl
ap and louvers angle
Unless “SWING” is selected, you should set the
fl
ap at a near-horizontal angle in FAN or HEAT
•
operation and at a upward position in COOL or DRY operation to obtain the best performance.
COOL ·
DRY
FAN ·
HEAT
CAUTION
Do not try to adjust the
fl
ap by hand.
•
If the
fl
ap is adjusted by hand, the mechanism may not operate properly or condensation may drip from the air outlet. If the
fl
ap is adjusted
without using the remote controller, turn off the unit once, and use the remote controller to restart the unit.
Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
•
While the outdoor unit is not in operation because the indoor temperature becomes higher (or lower) than the set temperature, the
fl
ap will
•
come to a stop.
01_EN_3P278434-5C.indd 12
01_EN_3P278434-5C.indd 12
8/18/2016 1:21:11 PM
8/18/2016 1:21:11 PM
