10 Configuration
Installation manual
14
FTXTP-M_FTXTP-N
Daikin room air conditioner
3P650253-16U – 2023.03
6
Snap the top of the upper case into the clip at the top of the
lower case and press to close the box.
7
Fix the upper adapter case with 2 screws (accessory).
2×
9.1.2
To place the adapter into the unit
1
Place the wireless LAN adapter against the hooks.
2
Lock the adapter by pressing it down.
3
To remove the adapter, perform the installation steps in reverse
order.
9.1.3
To check the functionality of the adapter
1
Turn on the power supply and check that the RUN lamp of the
product blinks.
9.2
Setting the wireless LAN
The customer is responsible for providing:
▪ Smartphone or tablet with minimum supported version of Android
or iOS, specified on
▪ Internet line and communicating device, such as modem, router,
etc.
▪ Wireless LAN access point.
▪ Installed free ONECTA application.
9.2.1
To install the ONECTA app
1
Go to Google Play (for Android devices) or the App Store (for
iOS devices) and search for "ONECTA".
2
Follow the directions on the screen to install the ONECTA app.
INFORMATION
Scan the QR code to download and install the ONECTA
app
on
your
mobile
phone
or
tablet:
10
Configuration
INFORMATION
In case 2 indoor units are installed in 1 room, set different
addresses for 2 user interfaces. For procedure refer to the
installer reference guide, for location see
11
Commissioning
NOTICE
General
commissioning
checklist.
Next
to
the
commissioning instructions in this chapter, a general
commissioning checklist is also available on the Daikin
Business Portal (authentication required).
The general commissioning checklist is complementary to
the instructions in this chapter and can be used as a
guideline and reporting template during commissioning and
hand-over to the user.
NOTICE
ALWAYS operate the unit with thermistors and/or pressure
sensors/switches. If NOT, burning of the compressor might
be the result.
