![background image](http://html1.mh-extra.com/html/daikin/ftxs25j2vma/ftxs25j2vma_operation-manual_4702478034.webp)
33
Care and Cleaning
Take off the titanium
1.
apatite photocatalytic air-
purifying
fi
lter.
Open the front panel and pull out the air
fi
lters.
•
Hold the recessed parts of the frame and unhook
•
the 4 claws.
Claw
Clean or replace the titanium
2.
apatite photocatalytic air-
purifying
fi
lter.
[Maintenance]
Vacuum dusts, and soak in
2-1
lukewarm water or water for about
10 to 15 minutes if dirt is heavy.
Do not remove the
fi
lter from frame when
•
washing with water.
After washing, shake off remaining
2-2
water and dry in the shade.
Since the material is made out of polyester, do
•
not wring out the
fi
lter when removing water from
it.
[Replacement]
Remove the tabs on the
fi
lter
frame and replace with a new
fi
lter.
Do not throw away the
fi
lter frame. Reuse the
•
fi
lter frame when replacing the titanium apatite
photocatalytic air-purifying
fi
lter.
Dispose of the old
fi
lter as non-
fl
ammable waste.
•
Set the
fi
lters as they were
3.
and close the front panel.
NOTE
Operation with dirty
fi
lters:
•
cannot deodorize the air,
–
cannot clean the air,
–
results in poor heating or cooling,
–
may cause odour,
–
Dispose of old
fi
lters as non-
fl
ammable waste.
•
To order titanium apatite photocatalytic air-purifying
•
fi
lter contact to the service shop there you bought the
air conditioner.
Item
Titanium apatite photocatalytic
air-purifying
fi
lter (without frame) 1 set
Part No.
KAF970A46
Titanium apatite photocatalytic air-purifying
fi
lter
01_EN_3P248412-1.indd 33
01_EN_3P248412-1.indd 33
6/3/2009 11:07:43 AM
6/3/2009 11:07:43 AM