![background image](http://html1.mh-extra.com/html/daikin/ftxs25j2vma/ftxs25j2vma_operation-manual_4702478017.webp)
16
To start operation
Press
and select the desired mode.
Each time the
•
is pressed a different setting option is displayed on the LCD.
By selecting “
•
” from the following icons, the air conditioner will be in COMFORT
AIRFLOW operation combined with INTELLIGENT EYE operation.
blank
No Setting
COMFORT
AIRFLOW
INTELLIGENT
EYE
Combination
When the
fl
aps (horizontal blades) are swinging, the operating as above will stop
•
movement of them.
To cancel operation
Press
and select “blank” on the LCD.
NOTE
Notes on COMFORT AIRFLOW operation
The
fl
ap position will change, preventing air from blowing directly on the occupants of the room.
•
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
•
Priority is given to the function of whichever button is pressed last.
The air
fl
ow rate will be set to AUTO. If the upper and lower air
fl
ow direction is selected, the COMFORT AIRFLOW function will be canceled.
•
Notes on INTELLIGENT EYE operation
Application range is as follows.
•
90°
55°
7m
55°
Vertical angle 90°
(Side view)
Horizontal angle 110°
(Top view)
7m
Sensor may not detect moving objects further than 7m away. (Check the application range)
•
Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
•
The sensor also mistakenly detects pets, sunlight,
fl
uttering curtains and light re
fl
ected off of mirrors as passersby.
•
INTELLIGENT EYE operation will not go on during POWERFUL operation.
•
NIGHT SET MODE
•
Page 20
will not go on during use of INTELLIGENT EYE operation.
Notes on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation
The air
fl
ow rate will be set to AUTO. If the upper and lower air
fl
ow direction is selected, the COMFORT AIRFLOW operation will be
•
canceled.
Priority is given to the function of whichever button is pressed last.
CAUTION
Do not place large objects near the sensor.
•
Also keep heating units or humidi
fi
ers outside the sensor’s detection area. This sensor can detect undesirable objects.
Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
•
01_EN_3P248412-1.indd 16
01_EN_3P248412-1.indd 16
6/3/2009 11:07:17 AM
6/3/2009 11:07:17 AM