background image

10

 | 

Wireless LAN adapter installation

Installer reference guide

42

FTXP-N

Daikin room air conditioner

4P518023-14L – 2022.06

10 Wireless LAN adapter installation

10.1 About the wireless LAN

For  detailed  specifications,  installation  instructions,  setting  methods,  FAQ,
declaration  of  conformity  and  the  latest  version  of  this  manual,  visit

app.daikineurope.com

.

INFORMATION: Declaration of conformity

Daikin  Industries  Czech  Republic  s.r.o.  declares  that  the  radio  equipment  type
inside  of  this  unit  is  in  compliance  with  Directive  2014/53/EU  and
S.I. 2017/1206: Radio Equipment Regulations 2017.

This  unit  is  considered  as  combined  equipment  according  to  the  definition  of
Directive 2014/53/EU and S.I. 2017/1206: Radio Equipment Regulations 2017.

INFORMATION

Install  the  wireless  LAN  adapter  after  finishing  the  indoor  unit  installation.  Refer  to

"10 Wireless LAN adapter installation"

 [

4

 42].

10.1.1 Basic parameters

What

Value

Frequency range

2400 MHz~2483.5 MHz

Radio protocol

IEEE 802.11b/g/n

Radio frequency channel

1~11

Output power

0 dBm~18 dBm

Effective radiated power

17 dBm (11b) / 13 dBm (11g) / 12 dBm
(11n)

Power supply

DC 14 V / 100 mA

10.2 To install the adapter

DANGER: RISK OF ELECTROCUTION

Turn off the power supply before installing the adapter.

Do NOT handle the adapter with wet hands.

Do NOT let the adapter get wet.

Do NOT disassemble, modify or repair the adapter.

Grip the connector when disconnecting the connecting cord.

Turn off the power supply in case the adapter gets damaged.

Содержание FTXP50N2V1B

























































Отзывы: