Si042153E
Vertical Swing Motor
Removal Procedure
19
7. Vertical Swing Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1. Remove the fan guards.
The fan guards are not
marked for difference
between right and left.
The number of the fan
guards varies depending on
the models.
1
2
Unfasten the 4 hooks at
the bottom and remove
the fan guard.
Remove the other fan
guard(s) in the same
way.
When reassembling, fit the
fan guard to the 2
projections at the top, then
fasten the 4 hooks at the
bottom.
2. Remove the swing motor
for vertical blade.
1
Release the center
shaft from the swing
motor shaft.
Hook
Fan guard
(R26178)
Projection
(R26179)
Swing motor shaft
Center shaft
(R26112)
