Daikin FTXL25J2V1B, Руководство по эксплуатации

Страница: 10 / 28

9

To set the clock
1. Press “CLOCK button”.
is displayed.
blinks.
2. Press “TIMER setting button”
to set the clock to the present
time.
Holding down “ ” or “ ” button rapidly
increases or decreases the time display.
3. Press “CLOCK button”.
blinks.

Turn the breaker ON
• Turning ON the breaker opens the flap, then
closes it again. (This is a normal procedure.)
NOTE

Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy. Clean
them once in about every two weeks.

Please note
• The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
• Use the air conditioner in the following conditions.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
Recommended temperature setting
For cooling: 26
°
C – 28
°
C
For heating: 20
°
C – 24
°
C
Mode Operating conditions If operation is continued out of this range
COOL Outdoor temperature: -10 – 46°C
Indoor temperature: 18 – 32°C
Indoor humidity: 80% max.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
HEAT Outdoor temperature: <RXLS, RXL, ARXL>
-25 – 24°C
Indoor temperature: 10 – 30°C
•
A safety device may work to stop the operation.
DRY Outdoor temperature: -10 – 46°C
Indoor temperature: 18 – 32°C
Indoor humidity: 80% max.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.