Daikin FTXL25J2V1B, Руководство по эксплуатации, Страница: 14 / 28

13

To start COMFORT AIRFLOW operation
3. Press “COMFORT AIRFLOW button”.
• The position of the flaps will change, preventing air from blowing directly on the occupants of
the room.
• “ ” is displayed on the LCD.
• Airflow rate is set to “AUTO”.

COOL/DRY

The flaps will go up.

HEAT

The flaps will go down.

To cancel COMFORT AIRFLOW operation
4. Press “COMFORT AIRFLOW button” again.
• The flaps will return to the memory position from before COMFORT AIRFLOW mode.
• “ ” disappears from the LCD.
Notes on COMFORT AIRFLOW operation
Notes on flaps and louvers angles.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same
time. Priority is given to POWERFUL operation.
• When “ SWING button ” is selected, the flaps
swinging range depends on the operation
mode. (See the figure.)

ATTENTION
• Always use a remote controller to adjust the
flaps angle. If you attempt to move it forcibly
with hand when it is swinging, the mecha-
nism may be broken.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
• If the air conditioner is operated in cooling or dry
mode with the flaps kept stopped in the down-
ward direction, the flaps will automatically start
operating in approximately an hour in order to
prevent dew condensation.
In DRY mode or COOL mode
Upper limit (SWING)
Lower limit (SWING)
Upper limit (SWING)
Lower limit (SWING)
Upper limit (SWING)
Lower limit (SWING)
Stop operation
Stop operation
Stop operation
In HEAT mode
In FAN mode
COMFORT AIRFLOW
COMFORT AIRFLOW