![background image](http://html1.mh-extra.com/html/daikin/ftnv20jvak/ftnv20jvak_installation-manual_2459378006.webp)
4
SAFETY PRECAUTIONS
!
WARNING
!
CAUTION
Installation and maintenance should be performed by quali
fi
ed persons
who are familiar with local code and regulation, and experienced with
this type of appliance.
All
fi
eld wiring must be installed in accordance with the national
wiring regulation.
Ensure that the rated voltage of the unit corresponds to that of the
name plate before commencing wiring work according to the wiring
diagram.
The unit must be GROUNDED to prevent possible hazard due to
insulation failure.
All electrical wiring must not touch the water piping or any moving
parts of the fan motors.
Con
fi
rm that the unit has been switched OFF before installing or
servicing the unit.
Risk of electric shock, can cause injury or death. Disconnect all remain
electric power supplies before servicing.
DO NOT pull out the power cord when the power is ON. This may
cause serious electrical shocks which may result in the
fi
re hazards.
Keep the indoor and outdoor units, power cable and transmission
wiring, at least 1m from TVs and radios, to prevent distorted pictures
and static. {Depending on the type and source of the electrical waves,
static may be heard even when more than 1m away}.
•
•
•
•
•
•
•
•
•
Please take note of the following important points when
installing.
Do not install the unit where leakage of
fl
ammable gas may
occur.
If gas leaks and accumulates around the unit, it may cause
fi
re ignition.
Ensure that drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause
water leakage which will dampen the furniture.
Do not overcharge the unit.
This unit is factory pre-charged. Overcharge will cause
over-current or damage to the compressor.
Ensure that the unit’s panel is closed after service or
installation.
Unsecured panels will cause the unit to operate noisily.
Sharp edges and coil surfaces are potential locations which may
cause injury hazards. Avoid from being in contact with these
places.
Before turning off the power supply set the remote controller’s
ON/OFF switch to the “OFF” position to prevent the nuisance
tripping of the unit.
If this is not done, the unit’s fans will start turning
automatically when power resumes, posing a hazard to service personnel
or the user.
Do not install the units at or near doorway.
Do not operate any heating apparatus too close to the air conditioner
unit or use in room where mineral oil, oil vapour or oil steam exist,
this may cause plastic part to melt or deform as a result of excessive
heat or chemical reaction.
When the unit is used in kitchen, keep
fl
our away from going into
suction of the unit.
This unit is not suitable for factory used where cutting oil mist or
iron powder exist or voltage
fl
uctuates greatly.
Do not install the units at area like hot spring or oil re
fi
nery plant
where sulphide gas exists.
Ensure the color of wires of the outdoor unit and the terminal
markings are same to the indoors respectively.
IMPORTANT : DO NOT INSTALL OR USE THE AIR
CONDITIONER UNIT IN A LAUNDRY ROOM.
Don’t use joined and twisted wires for incoming power supply.
The equipment is not intended for use in a potentially explosive
atmosphere.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
INSTALLATION MANUAL
NOTICE
Disposal requirement
Your air conditioning product is marked with this symbol. This means that electrical and electronic products shall not be mixed with unsorted household
waste.
Do not try to dismantle the system yourself: the dismantling of the air conditioning system, treatment of the refrigerant, of oil and of other parts must be
done by a quali
fi
ed installer in accordance with relevant local and national legislation.
Air conditioners must be treated at a specialized treatment facility for re-use, recycling and recovery. By ensuring this product is disposed of correctly,
you will help to prevent potential negative consequences for the environment and human health. Please contact the installer or local authority for more
information.
Batteries must be removed from the remote controller and disposed of separately in accordance with relevant local and national legislation.
This manual provides the procedures of installation to ensure a safe and good standard of operation for the air conditioner unit.
Special adjustment may be necessary to suit local requirements.
Before using your air conditioner, please read this instruction manual carefully and keep it for future reference.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons.
This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
1-IM-5WMJ(R)-0714(2)DAIKIN(SASO)4 4
1-IM-5WMJ(R)-0714(2)DAIKIN(SASO)4 4
5/22/15 4:27:15 PM
5/22/15 4:27:15 PM
Содержание FTNV20JVAK
Страница 25: ...CVR IM 5WMJ R 0714 2 DAIKIN SA3 3 CVR IM 5WMJ R 0714 2 DAIKIN SA3 3 5 22 15 4 26 07 PM 5 22 15 4 26 07 PM...
Страница 28: ...CVR IM 5WMJ R 0714 2 DAIKIN SA3 3 CVR IM 5WMJ R 0714 2 DAIKIN SA3 3 5 26 15 9 25 35 AM 5 26 15 9 25 35 AM...
Страница 51: ...CVR IM 5WMJ R 0714 2 DAIKIN SA2 2 CVR IM 5WMJ R 0714 2 DAIKIN SA2 2 5 26 15 9 25 35 AM 5 26 15 9 25 35 AM...