Daikin FTNE50MV14, Руководство по эксплуатации и инструкция по установке

Страница: 31 / 88

29
Model
Liquid pipe
(F
oo
t b
ol
t-h
ol
e
ce
nt
ers)
(Foot bolt
-hole ce
nters)
(From un
it’s
side)
Unit: mm
Stop valve cover
How to remove the stop
valve cover.
• Remove the screw on the
stop valve cove
r.
• Slide the cover downward
to remove it.
• Insert the upper part of the
stop valve cover into the
outdoor unit to install.
•
T ighten the screws.
How to attach the stop
valve cover.
In sites with poor drainage,
use block bases for outdoor
unit. Adjust foot height until
the unit is leveled.
Otherwise, water leakage
or pooling of water may
occur.
Where there is a danger of the unit
falling, use foot bolts, or wires.
Allow space for piping
and electrical servicing.
470
96
29
7
(FTNE35)
250 from wall
* Appearance of the outdoor unit
may differ from some models.
Max. piping allowable length
Additional refrigerant required
for refrigerant pipe exceeding
10m in length.
20g/m
Gas pipe O.D. 12.7mm
O.D. 6.4mm
20m
2.5m
15m
Min. piping allowable length
RNE35
Be sure to add the proper amount of
additional refrigerant. Failure to do so
may result in reduced performance.
The suggested shortest pipe length is
3m, in order to avoid noise from the
outdoor unit and vibration.
(Mechanical noise and vibration may occur
depending on how the unit is installed and
the environment in which it is uesd.)
Max. piping allowable height