Daikin FFQ25C2VEB, Руководство по установке

Страница: 13 / 16

FFQ25~60C2VEB
Split System air conditioners
4P341094-1B – 2013.04 Installation manual
10
Wiring diagram
Indoor unit
A1P......................Printed circuit board
C105 ....................Capacitor (M1F)
DS1......................Dip switch on PCB
F1U......................Fuse (F, 5 A, 250 V)
HAP .....................Flashing lamp (service monitor green)
K2R......................Magnetic relay
M1F .....................Fan motor
M1P .....................Drain pump motor
M1S~M4S............Swing motor
R1T......................Thermistor (air)
R2T,R3T ..............Thermistor (coil)
S1L ......................Float switch
V1R......................Diode bridge
X1M .....................Terminal block
X2M .....................Terminal block
Z1F ......................Noise filter
Z1C......................Ferrite core
Z2C......................Ferrite core
PS........................Switching power supply
RC .......................Receiver
TC........................Transmitter
Wireless remote controller (receiver/display unit)
A2P......................Printed circuit board
A3P......................Printed circuit board
BS1......................Push button switch on PCB
H1P......................Pilot lamp (on-red)
H2P......................Pilot lamp (timer-green)
H3P......................Pilot lamp (filter sign-green)
H4P......................Pilot lamp (defrost-orange)
SS1......................Selector switch (main/sub)
SS2......................Selector switch (wireless address set)
Sensor kit
A4P......................Printed circuit board
A5P......................Printed circuit board
Wired remote controller
R4T......................Thermistor (air)
Connector for optional parts
X24A....................Connector (wiring remote controller)
X33A....................Connector (adaptor for wiring)
X35A....................Connector (power supply for adaptor)
X81A....................Connector (sensor kit)
Notes
1
: Terminal : Connector : Field wiring
2 In case of using a central remote controller, connect it to the unit in accordance with the attached installation manual.
3 X2A, X8A, X33A, X35A, X36A are connected when the optional accessories are being used.
In case of using a self cleaning decoration panel, see the wiring diagram of the self cleaning decoration panel.
4 Connect power of ADAPTOR FOR WIRING to terminal block (X2M) of indoor unit directly.
5 In case of main/sub change-over, see the installation manual supplied with the remote controller.
6 Colour legend
BLK : Black BLU : Blue BRN : Brown
GRN : Green GRY : Gray ORG : Orange
RED : Red WHT : White YLW : Yellow
In case of simultaneous operation system :
Indoor unit (Master) / (Slave) :
To outdoor unit :
Remote controller :
Control box :
Receiver/display unit :
Central remote controller :
Wired remote controller :