Daikin FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU, Руководство по обслуживанию, Страница: 67 / 146

SiUS091628EA Troubleshooting with LED
Service Diagnosis 56
2. Troubleshooting with LED
2.1 Indoor Unit
Operation Lamp The operation lamp blinks when any of the following errors is detected.
1. When a protection device of the indoor or outdoor unit is activated, or when the thermistor
malfunctions.
2. When a signal transmission error occurs between the indoor and outdoor units.
In either case, conduct the diagnostic procedure described in the following pages.
With wired remote controller (BRC1E73)
With wireless remote controller kit (BRC082A41W, BRC082A42W(S))
In case of wireless remote controller, a transmitter board (A2P) and a receiver (A3P) are installed
on indoor unit. When the error occurs, the operation lamp on the receiver (A3P) blinks.
2.2 Outdoor Unit
The outdoor unit has one green LED (LED A) on the PCB. When the microcomputer works in order,
the LED A blinks. (Refer to pages 10, 11 for the location of LED A.)
Operation lamp (green)
(R23942)
+
The error or warning message also blinks on the basic screen.
+
(R24044)
Operation lamp
(red)