Daikin FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU, Руководство по обслуживанию, Страница: 22 / 146

Outdoor Unit SiUS091628EA
11 Printed Circuit Board Connector Wiring Diagram
4.2 RX15/18QMVJU
Main PCB
Caution Replace the PCB if you accidentally cut a wrong jumper.
Jumpers are necessary for electronic circuit. Improper operation may occur if you cut any of them.
1) S20 Connector for electronic expansion valve coil
2) S40 Connector for overload protector
3) S70 Connector for DC fan motor
4) S80 Connector for four way valve coil
5) S90 Connector for thermistors
(outdoor temperature, outdoor heat exchanger, discharge pipe)
6) HL1, HN1, S Connector for terminal block
7) E1, E2 Terminal for ground
8) U, V, W Connector for compressor
9) FU1, FU2 Fuse (3.15 A, 250 V)
10)FU3 Fuse (30 A, 250 V)
11)J6 Jumper for facility setting
∗
Refer to page 125 for details.
12)LED A LED for service monitor (green)
13)V1, V2, V3 Varistor
LED A
U, V, W
2P443814-20
FU2
V1
FU1
V3
V2
E1, E2
HL1, HN1, S
FU3
S80 S20 S40 S90 J6
S70