Daikin FDYQ100LBV1, Руководство по установке

Страница: 5 / 28

4
Ducted Air Conditioners
Installation Manual
Name Hose Clamp Drain hose
Installation
Manual
Operation
Manual
Pipe
insulation
Quantity 1 1 1 1 2
Shape
BEFORE INSTALLATION
•
The accessories needed for installation must be retained in your custody until the installation work is completed.
Do not discard them!
•
Decide upon a safe line of transport.
• Try to leave the unit inside its packaging whilst moving. Where unpacking is unavoidable use a sling of soft
material or protective plates together with a rope when lifting to avoid damage or scratches to the unit.
• When opening the unit or moving it after opening be sure to lift it by holding onto the unit carefully without
exerting any pressure on other parts, especially drain piping, refrigerant piping and other resin parts.
• Be sure to check the type of refrigerant to be used before doing any work. (Using an incorrect refrigerant will
prevent normal operation of the unit.) This model uses R410A.
• Refer to the installation manual of the outdoor unit in conjunction with this manual for items not described in this
manual.
PRECAUTIONS
•
Be sure to read this manual before installing the indoor unit.
• This unit is for indoor use only.
•
This unit is suitable for installation in a household, commercial and light industrial environment.
• Do not install or operate the unit in rooms mentioned below.
•
Laden with mineral oil or filled with oil vapour or spray like in kitchens.
• Where corrosive gas like sulfuric gas exists.
•
Where volatile flammable gas like thinner or petrol is used.
• Where machines can generate electromagnetic waves.
•
Where the air contains high levels of salt or other corrosive materials.
• Where voltage fluctuates greatly.
•
In vehicles or vessels.
• To avoid water leaks, etc., be sure to install a return air filter (field supplied) inside the return air passage.
ACCESSORIES
Check that the following accessories are included with your unit.
OPTIONAL ACCESSORIES
• A Daikin remote controller is not included in the packaging with the indoor unit. It needs to be purchased separately.
Install the remote controller in an appropriate place.
If utilizing the temperature sensor in the remote controller BRC1E62 (see page 14) ensure that the controller
is installed in a location where the correct air temperature is measured.
• Hanging brackets are required if the indoor unit is to be suspended. (Available in packs of 4).