28
English
Place of installation must ensure the machine will not be buried under snow or subject to the infl uence of
(6)
rubbish or oil fog.
The installation site must be at a place where the air exhaust outlet does not face strong wind.
(7)
8.4 Precautions on Installation of Indoor Unit
8.4.1 Selection of Installation Site
Ensure the top hanging piece has strong strength to withstand the weight of the unit.
(1)
The drainage pipe has convenient fl ow of water.
(2)
There is no obstacle blocking the air intake and exhaust outlet, so as to ensure sound air circulation.
(3)
The installation spaces required by the drawing must be ensured, so as to provide enough space for the
(4)
service and maintenance.
The installation site must be far away from heat source, leakage of infl ammable gas or smoke.
(5)
The indoor unit is of ceiling mount (indoor unit is hidden inside the ceiling).
(6)
The indoor and outdoor units, the power cable and the connecting electrical lines must be at least 1 meter
(7)
from any TV set or radio. This is to avoid image interference or noise of the TV set or radio. (Even if the
distance is 1 meter, noise can also exist if there is strong electric wave.)
8.4.2 Installation of Indoor Unit
Insert a M10 expansion bolt into the hole. Drive a nail into the bolt. Refer to the profi le dimensions drawing
(1)
of the indoor unit for the distance between the holes. Refer to Fig.8.5 for the installation of the expansion
bolt.
Air-conditioning Unit
Hook
Ceiling-mount
Screw
8.5
Fig.
8.6
Fig.
Install the hook onto the indoor unit as Fig.8.6 shows.
(2)
Install the indoor unit at the ceiling as Fig.8.7 shows.
(3)
Air Supply
Nut
Hook
Screw
)
Enlargement
)
Air Intake
a
48mm
a
48mm
8.7
Fig.
01_EN_EM09A058A.indd 28
01_EN_EM09A058A.indd 28
5/13/2010 11:43:33 AM
5/13/2010 11:43:33 AM