Daikin FDYM-PV1, Руководство по эксплуатации и установке

Страница: 16 / 45

14 English
5.7 Air Exchange Setting*
Turn-on air exchange function:
Under on-state of the unit, press Function button into this function setting (Air mark
blinks). AIR 1 displayed at the ambient temperature-displayed location (888) is defaulted
(the last type of AIR will be displayed after adjustment). Press or button to adjust air
exchange type. Press
Enter/Cancel button to turn on/off air exchange function. After
turning on this function, the air mark shows.
There are 10 types of air exchange, but only 1-2 types are for wireless remote control. Refer to the following
details:
1 —— The unit continuously runs for 60min, and fresh air valve opens for 6 min.
2 —— The unit continuously runs for 60min, and fresh air valve opens for 12 min.
3 —— The unit continuously runs for 60min, and fresh air valve opens for 18 min.
4 —— The unit continuously runs for 60min, and fresh air valve opens for 24 min.
5 —— The unit continuously runs for 60min, and fresh air valve opens for 30 min.
6 —— The unit continuously runs for 60min, and fresh air valve opens for 36 min.
7 —— The unit continuously runs for 60min, and fresh air valve opens for 42 min.
8 —— The unit continuously runs for 60min, and fresh air valve opens for 48 min.
9 —— The unit continuously runs for 60min, and fresh air valve opens for 54 min.
10 —— The unit continuously runs for 60min, and fresh air valve aways opens.
Turn-off air exchange function:
During air exchange function, press Function button into air exchange function.
In this case, air mark is blinking, and then press Enter/Cancel button to turn off this
function. Air mark will subsequently disappear.
Air exchange setting is shown as Fig.5.7:
Press “Function” button
into air exchange function
Press “Function” button
into air exchange function Press “Enter/Cancel” button to
turn on air exchange function
Turn on the unit, without
turning on air exchange
function
Press “Enter/Cancel” button to
turn off air exchange function
Press “ ” or “ ” button
to adjust the type of air
exchange
5.7 Air exchange device Fig.
In air exchange mode, press “Function” button or there is no any operation within 5s after the last button Note:
operation, the system will quit from air exchange setting, and current setting data won’t be memoried.
01_EN_EM09A058A.indd 14 01_EN_EM09A058A.indd 14 5/13/2010 11:43:20 AM 5/13/2010 11:43:20 AM