![Daikin FCQ50KVEA Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/daikin/fcq50kvea/fcq50kvea_operation-manual_4704734009.webp)
10
CAUTION
• Before cleaning, be sure to stop unit operation, turn
the breaker off or remove the power cord.
Otherwise, an electric shock and injury may result.
• Do not wash the air conditioner with water, as this may
result in electric shocks or fire.
• Consult your dealer regarding cleaning the inside of
the air conditioner.
Improper cleaning may cause breakage of plastic parts,
water leakage and other damage as well as electric
shocks.
• Take care of scaffolding and exercise caution when
working high above ground level.
HOW TO CLEAN THE AIR FILTER
Clean the air filter when the display shows “
” (TIME TO
CLEAN AIR FILTER).
It will display that it will operate for a set amount of time.
Increase the frequency of cleaning if the unit is installed in a
room where the air is extremely contaminated.
If the dirt becomes impossible to clean, change the air filter.
(For changing air filter, please contact your dealer.)
1. Open the suction grille.
Pull it downward slowly while pressing the buttons pro-
vided on two spots.
(Do the same procedure for closing.)
2. Remove the air filter.
Perform the operation in the order (1) and (2).
3. Clean the air filter.
Use vacuum cleaner
A)
or wash the air filter with water
B)
.
A)
Using a vacuum cleaner
B)
Washing with water
When the air filter is very dirty,
use soft brush and neutral
detergent.
Remove water and dry in the shade.
NOTE
• Do not wash the air conditioner with hot water of more than
50°C, as doing so may result in discoloration and/or defor-
mation.
• Do not expose it to fire, as doing so may result in burning.
4. Fix the air filter.
Refer to item No. 2.
5. Shut the suction grille.
Slowly push up the suction grille, and then securely hook
it onto the decoration panel while pushing the two knobs.
NOTE
• The strings may be caught when the suction grille is
closed. Before closing the suction grille, ensure that the
strings are not getting out from the side of the suction
grille.
6. After turning on the power, press FILTER SIGN
RESET button.
The “TIME TO CLEAN AIR FILTER” display vanishes.
HOW TO CLEAN AIR OUTLET AND OUTSIDE
PANELS
• Clean with soft cloth.
• When dirt will not come off, remove it with a cloth wrung
out of mild detergent diluted with water, and then wipe with
a dry cloth.
• When the flap is extremely contaminated, remove it as
below and clean or exchange it.
(For changing the flap, please contact your dealer.)
Fig. 1
(2)
(1)
Fig. 2
Protrusions
on grille
(1) Pull the ends of the air filter down and remove
the holes of the air filter from the grille protrusions.
(Both left and right sides.)
Air filter
Holes
Protrusions
on grille
Protru-
sions
on grille
(2) Lift the air filter and remove the holes of the air
filter from the protrusions on the upper side of
the grille. (Both left and right sides.)
Air filter
Holes
Lift
Yes
No
Suction grille
String
String is getting
out from the
suction grille.
01_EN_3P177429-9S.fm Page 10 Saturday, October 16, 2010 2:24 PM