7
To operate the remote controller
• Aim the transmitter of the remote controller
at the receiver of the indoor unit.
• Ensure there is no blockage such as curtain
between the indoor unit and the remote
controller, signal transmission will be
unsuccessful.
Receiver
To
fi
x the remote controller
holder on the wall
1. Choose a location where signal is able to
reach the unit.
2. Fix the holder onto a wall, a pillar or etc
with the screws supplied with the holder.
3. Place the remote controller on the holder.
Remote controller
holder
Screws
Remote controller
PREPARATION BEFORE OPERATION
About remote controller
• Do not drop nor wet the remote controller.
• Never expose the remote controller under direct sunlight.
• Dust on the transmitter lense cover will reduce the sensitivity.
• Signal communication may be affected if the air conditioner is being installed near
an electronic-starter-type fl uorescent lamp (such as inverter-type lamp) in the room.
1-OM-NCCK-DAIKIN-3P661416-2-EN.indd 7
1-OM-NCCK-DAIKIN-3P661416-2-EN.indd 7
10/9/2021 2:04:05 PM
10/9/2021 2:04:05 PM
www.ttair.co.th | Tel : 02-385-0728 | E-mail : [email protected] | LINE ID : @ttair