Daikin F, Руководство по эксплуатации, Страница: 7 / 33

Operation
Adjusting the Airflow Rate/SMELL PROOF/CHILD LOCK Operation
Adjusting the airflow rate
You can adjust the airflow rate to increase your comfort.
■
To change the airflow rate setting
Press (•FANJ. • Each pressing of [•FANj changes the airflow rate setting in sequence.
1-1�---- l---1�.... I
Indoor unit quiet Airflow rate 1-5 (Low to High)
• In DRY operation, the airflow rate setting cannot be changed.
• When the airflow is set to"�", quiet operation starts and noise
from the indoor unit will become quieter.
• In the quiet operation mode, the airflow rate is set to a weak level.
SMELL PROOF operation
The SMELL PROOF operation prevents unpleasant odour inside the indoor unit. This function is
available in both DRY and COOL operation.
■
To use SMELL PROOF operation
1. Before starting the operation, press (•FAN) to set to Auto.
2. Press (MooE) to select the DRY or COOL operation.
� . Air starts circulating about 1 minute after the operation is started.
3. Press� However, if the POWER CHILL operation is started, air starts circulating
immediately.
CHILD LOCK operation
Setting the CHILD LOCK disables all the buttons except when ECONO and POWERFULL button
press together for about 5 seconds.
□
To set the CHILD LOCK :
• Press
t;ECONO)
and � togetherfor about 5 seconds.
•
"wie"
will be displayed on the remote LCD.• If a button is pressed while CHILD LOCK is on,•
wie"
blinks.
□
To CANCEL the CHILD LOCK
Presst;ECONO)and � together for about 5 seconds again.
" wie
"Disappears from the LCD.
NOTE
• Note on airflow rate setting
• At smaller airflow rates, the cooling effect is also smaller.
• Note on SMELL PROOF operation
• SMELL PROOF operation can prevent some odours, but not all.
• Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, turn off the circuit breaker.
• Operation outside the humidity or temperature range described in the table may cause a
safety device to disable the system.
Mode Operating conditions If operation Is continued out of this range
COOL
Outdoor temperature: 20-(52-54
°
C)* • A safety device may activate to stop the
Indoor temperature: 18-32 ° C
operation.
Max. temperature varying model to model.
• Dew may form on the indoor unit and drip from it
DRY Indoor humidity: 80% max.
when COOL or DRY operation is selected.
6