Daikin ERGA06DAV3A, Руководство по установке для специалистов

Страница: 42 / 108

7 Installation
Installer reference guide
42
ERGA04~08DAV3(A) + 08S23DAV
Daikin Altherma – Low temperature split
4P499573-1A – 2018.11
7.9.4 Guidelines when connecting the electrical
wiring
Keep the following in mind:
▪ If stranded conductor wires are used, install a round crimp-style
terminal on the end of the wire. Place the round crimp-style
terminal on the wire up to the covered part and fasten the terminal
with the appropriate tool.
b a
a Stranded conductor wire
b Round crimp-style terminal
▪ Use the following methods for installing wires:
Wire type Installation method
Single-core wire
c b
c
a a
A
AA´
A´
a Curled single-core wire
b Screw
c Flat washer
Stranded conductor
wire with round
crimp-style terminal
c b b a c
a
B
B
a Terminal
b Screw
c Flat washer
O Allowed
X NOT allowed
Tightening torques
Item Tightening torque (N•m)
M4 (X1M) 1.2~1.5
M4 (earth)
7.9.5 Specifications of standard wiring
components
Component 06D
AV3
ERGA08DAV3 ERGA04~08D
AV3A
Power
supply
cable MCA
(a)
19.9 A 24.0 A 15.9 A
Voltage 230 V
Phase 1~
Frequen
cy 50 Hz
Wire
sizes Must comply with applicable legislation
Interconnection
cable Minimum cable section of 1.5 mm² and
applicable for 230 V
Recommended
field fuse 20 A 25 A 16 A
Earth leakage
circuit breaker Must comply with applicable legislation
(a) MCA=Minimum circuit ampacity. Stated values are
maximum values (see electrical data of combination with
indoor units for exact values).
7.9.6 To connect the electrical wiring on the
outdoor unit
1 Remove the switch box cover.
2×
2 Strip insulation (20 mm) from the wires.
a b
a Strip wire end to this point
b Excessive strip length may cause electrical shock or
leakage.
3 Connect the interconnection cable and power supply as follows.
Ensure stress relief by using the wire clamp.
a
c
d
1N~ 50 Hz
220-240 V
b
a Interconnection cable
b Power supply cable
c Fuse
d Earth leakage circuit breaker
1 2 3
L N
L N PWR
12 3
3×
a
a Wire clamp
4 Reattach the switch box cover.