Daikin Enfinity CCW, Руководство по установке и обслуживанию

Страница: 23 / 48

P
rior
t
o
s
tart
-
uP
www.DaikinApplied.com 23 IM 1049-9
Changing PSC Fan Motor Speed
The fan motor can be changed from high to low speed or
vice versa by interchanging the wires on the black and
red labeled terminals on the motor terminal block.
DANGER
Hazardous Voltage!
The installer must determine and follow all applicable
codes and regulations. This equipment presents
hazards of electricity, rotating parts, sharp edges,
heat and weight. Failure to read and follow these
instructions can result in property damage, severe
personal injury or death.
CAUTION
Sharp edges can cause personal injury. Avoid contact with them..
Table 10: Fan Motor Voltage and Terminal Slots
CCH, CCW R410-A
Unit Size
Volts and Number of Terminal Slots
Factory
Fan Speed
208V 460V 575V
007 4 4 4 High
009 4 4 4 High
012 4 4 4 High
015
(standard static)
4 4 4 Low
019 4 4 4 High
024
(low static)
4 4 4 High
024
(standard static)
4 4 4 Low
030 4 4 4 High
036 4 4 4 High
042 4 4 5 High
048 4 5 5 Low
060 4 5 5 High
070
4 5 5 High
Unit Sizes 007, 009, 012 (all available
voltages)
Fan motors on unit sizes 007, 009, 012 (all available
voltages) are factory wired for high. To change between
high and low speed, interchange the red and black wires.
Figure 19: Sizes 007 through 012 (all available voltages)
GRN
RD LOW
BLK
HIGH
Factory
Wired
WHT
CAPACITOR
LINE
BRN
FAN
MOTOR
Unit Sizes 015 and 024 (all available
voltages)
Fan motors on unit sizes 015 and 024 in all available
voltages have a four-position terminal block and are
factory wired for low speed ( Figure 20 ). To change
between high and low speed, interchange the red and
black wires.
Figure 20: Sizes 015 through 024 (all available voltages)
1 (YEL)
2 (BRN)
3 (BLK)
4 (RED)
LOW
FACTORY
WIRED
LINE
HIGH
GR / YE
CAPACITOR
FAN MOTOR
Unit Sizes 019, 030, 036 (all available
voltages) and size 024 (low static)
Fan motors on unit sizes 019, 030, 036 (standard static)
and size 024 (low static) in all available voltages have
a four-position terminal block and are factory wired for
high speed ( Figure 21 ). To change between high and low
speed, interchange the red and black wires.
Figure 21: Sizes 019, 030, 036 (standard static) and size
024 (low static) factory wired for high speed
1 (YEL)
2 (BRN)
3 (BLK)
4 (RED)
LOW
LINE
HIGH
FACTORY
WIRED
GR / YE
CAPACITOR
FAN MOTOR
Unit Size 042 (208-230/60/1, 208-230/60/3,
380/50/3, 460/60/3)
The fan motor on unit size 042 in voltages of, 208-
230/60/1, 208-230/60/3, 380/50/3 and 460-60-3 have a
four-position terminal block and are factory wired for high
speed ( Figure 22 ). To change between high and low
speed, interchange the red and black wires.
Figure 22: Sizes 042 (208-230/60/1, 208-230/60/3, 380/50/3,
460/60/3) factory wired for high speed
1 (YEL)
2 (BRN)
3 (BLK)
4 (RED)
LOW
LINE
HIGH
FACTORY
WIRED
GR / YE
CAPACITOR
FAN MOTOR