Daikin EKHHS200AA1V3, Руководство по эксплуатации

Страница: 13 / 20

EKHVWQ0 E260AA1V3
Domestic hot water heat pump
4PW65343-1A – 10.2010
Operation manual
12
Consulting programmed actions
Consulting domestic water heating
Consulting domestic water heating is carried out as follows:
1 Press the < button.
The actual mode is blinking.
2 Use the pi and pj buttons to select the mode you want
to consult (quiet mode s , or domestic water heating w ). Select
domestic water heating ( w ).
The selected mode is blinking.
3 Press the < button to confirm the selected mode.
The actual day is blinking.
4 Select the day you would like to consult by means of the pi
and pj buttons.
The selected day is blinking.
5 Press the < button to confirm the selected day.
The first programmed action of the selected day appears.
6 Use the pi and pj buttons to consult the other
programmed actions of that day.
This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.
Consulting quiet mode
Consulting quiet mode is carried out as follows:
1 Press the < button.
The actual mode is blinking.
2 Use the pi and pj buttons to select the mode you want
to consult (quiet mode s , or domestic water heating w ). Select
quiet mode ( s ).
The selected mode is blinking.
3 Press the < button to confirm the selected mode.
The first programmed action is displayed.
4 Use the pi and pj buttons to consult the other
programmed actions.
This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.
By pressing the pr button several times, you return to previous
steps in this procedure and finally return to normal operation.
Tips and tricks
Programming the next day(s) for domestic water heating
After confirming the programmed actions of a specific day (i.e. after
pressing the
< button for 5 seconds), press the pr button once. You
can now select another day by using the pi and pj buttons
and restart consulting and programming.
Copying programmed actions to next day
In heating mode program it is possible to copy all programmed
actions of a specific day to the next day (e.g. copy all programmed
actions from "
1 " to " 2 ").
To copy programmed actions to the next day, proceed as follows:
1 Press the < button.
The actual mode is blinking.
2 Use the pi and pj buttons to select domestic water
heating.
The mode is blinking.
You can leave programming by pressing the pr button.
3 Press the < button to confirm the selected mode.
The actual day is blinking.
4 Select the day you would like to copy to the next day by means
of the
pi and pj buttons.
The selected day is blinking.
5 Press the < and pr buttons simultaneously for 5 seconds.
After 5 seconds the display will show the next day (e.g. " 2 " if
" 1 " was selected first). This indicates that the day has been
copied.
You can return to step 2 by pressing the pr button.
Deleting one or more programmed actions
Deleting one or more programmed actions is done at the same time
as storing the programmed actions.
When all actions for one day have been programmed, make sure that
the display shows the highest action number you would like to save.
By pressing the
< button for 5 seconds, you store all actions except
those with a higher action number than the one that is displayed.
E.g. when the < button is pressed when action number 3 is
displayed, actions 1, 2 and 3 are stored but 4 and 5 are deleted.
To delete all actions on one day, press the < button when the blank
action is selected.
(e.g. sequence of actions: 1
➞
2
➞
3
➞
4
➞
5
➞
blank
➞
1
➞
2...)
INFORMATION
Returning to previous steps in this procedure is done by
pressing the
pr button.
INFORMATION
Returning to previous steps in this procedure is done by
pressing the
pr button.