![background image](http://html1.mh-extra.com/html/daikin/ebhq006bav3/ebhq006bav3_operation-manual_501454013.webp)
0 EKCBX/H008BAV3
Unit for air to water heat pump system
4PW64603-1A – 08.2010
Operation manual
12
5
Save the new value by pressing the
pr
button.
6
Repeat step 2 through 4 to change other
fi
eld settings as
required.
7
When
fi
nished, press the
z
button to exit FIELD SET MODE.
Detailed description
[0] User permission level
If required, certain user interface buttons can be made unavailable for
the user.
Three permission levels are de
fi
ned (see the table below). Switching
between level 1 and level 2/3 is done by simultaneously pressing
buttons
pfi
and
pfj
immediately followed by
simultaneously pressing buttons
s
and
ba
, and keeping all 4
buttons pressed for at least 5 seconds (in normal mode). Note that no
indication on the user interface is given. When level 2/3 is selected,
the actual permission level – either level 2 or level 3 – is determined
by the
fi
eld setting [0-00].
[1] Weather dependent set point (heating operation only)
The weather dependent set point
fi
eld settings de
fi
ne the parameters
for the weather dependent operation of the unit. When weather
dependent operation is active the water temperature is determined
automatically depending on the outdoor temperature: colder outdoor
temperatures will result in warmer water and vice versa. During
weather dependent operation, the user has the possibility to shift up
or down the target water temperature by a maximum of 5°C.
■
[1-00] Low ambient temperature (Lo_A): low outdoor
temperature.
■
[1-01] High ambient temperature (Hi_A): high outdoor
temperature.
■
[1-02] Set point at low ambient temperature (Lo_Ti): the
target outgoing water temperature when the outdoor
temperature equals or drops below the low ambient
temperature (Lo_A).
Note that the Lo_Ti value should be higher than Hi_Ti, as for
colder outdoor temperatures (i.e. Lo_A) warmer water is
required.
■
[1-03] Set point at high ambient temperature (Hi_Ti): the
target outgoing water temperature when the outdoor
temperature equals or rises above the high ambient
temperature (Hi_A).
Note that the Hi_Ti value should be
lower
than Lo_Ti, as for
warmer outdoor temperatures (i.e. Hi_A) less warm water
suf
fi
ces.
NOTICE
Changes made to a speci
fi
c
fi
eld setting are only stored
when the
pr
button is pressed. Navigating to a new
fi
eld
setting code or pressing the
z
button will discard the
change made.
NOTICE
■
Before shipping, the set values have been set as
shown under
"Field settings table" on page 15
■
When exiting FIELD SET MODE, "
88
" may be
displayed on the user interface LCD while the unit
initialises itself.
Button
Permission level
1
2
3
Quiet mode button
s
operable
—
—
Weather dependent
set point button
ba
operable
—
—
Schedule timer
enable/disable button
pr
operable
operable
—
Programming button
<
operable
—
—
Time adjust buttons
pf
i
pf
j
operable
—
—
Inspection/test
operation button
z
operable
—
—
T
t
Target water temperature
T
A
Ambient (outdoor) temperature
Shift value
= Shift value
Lo_Ti
Lo_A
Hi_A
T
A
T
t
+ 05
00
– 05
Hi_Ti
Shift value
Содержание EBHQ006BAV3
Страница 19: ......
Страница 20: ...Copyright 2010 Daikin 4PW64603 1A 08 2010 ...