IM
1133-C
DIII-NET COMMUNICATION GATEWAY
15
www.DaikinApplied.com
Intelligent Touch Controller Configuration
The Intelligent Touch Controller also needs to be configured. This section shows how to change the icon for a zone and how to
set the dead band to zero. Refer to the Intelligent Touch controller Manual (ED72-423) for more information on navigating the
Intelligent Touch Controller menus. The Intelligent Touch controller Manual is available on
www.daikinac.com
.
If the iTouch Manager is being used, see the next section “
iTouch Manager Configuration
”
Change an Icon on the Intelligent Touch Controller:
1.
Select Settings by pressing the “S” button in lower right corner, indicated by the red arrow.
Figure 10, Zone Screen on Intelligent Touch Controller
2.
In the Settings Menu press the down arrow, select “System” and then press Execute.
Figure 11, System Setting Screen Shot, Intelligent Touch Controller
3.
When the System menu displays as shown in Figure 12, select “Zone/Group” and then press the Execute button.
Figure 12, Zone/Group Selection Screen, Intelligent Touch Controller
4.
In the Zone / Group Settings screen, press the “Settings” button in the “Reg. Groups” box and then OK.
Settings Button
Down arrow
