Daikin Destiny VFD Series Скачать руководство пользователя

Страница: 4 / 60

IM 782-12 • DESTINY AIR HANDLERS 4

www.DaikinApplied.com

Installation

Receiving and Handling

1. Carefully check items against the bills of lading to verify

all crates and cartons were received. Carefully inspect

all units for damage when received. Report visible and

concealed damage immediately to the carrier and a file a

claim for damage.

2. Destiny air handler units are thoroughly inspected before

leaving the factory. Install units carefully to prevent

damage.

3. Leave enough space around the unit for proper

maintenance, filter removal, lubrication, belt adjustment,

and removal of coils, if necessary (refer to

Figure 2 on

page 6

for service clearances).

Use flexible connections on the inlet and outlet duct

connections of the unit.

5. For 002–010 sized ceiling hung units, spring isolation of

the cabinet is recommended.

6. All fans are dynamically balanced before leaving the

factory. Carefully inspect fans for rough handling that can

cause misalignment or a damaged shaft.

7. Adequately pitch and trap drain line from drain pan

connection.

Storing the Unit

Store unit on a level surface. If air handling units are to be

stored for any period of time, it is important to rotate the

fan wheel (quarterly, as a minimum) to prevent permanent

distortion of drive components. Keep the fan bearings

lubricated. Grease may settle in the lower part of the bearing,

which may lead to oxidation on the upper portion of the bearing

surface.
Store units indoors in a clean, dry environment on a level

surface. Moisture, debris, and minerals can cause permanent

damage to the cabinet and components. Do not allow

coverings to trap moisture on the galvanized surface.

Содержание Destiny VFD Series





























































Результаты поиска

Содержание Destiny VFD Series

Отзывы:

Похожие инструкции для Destiny VFD Series

Бренды по названию

Популярные бренды

Daikin Destiny VFD Series, Руководство по установке и обслуживанию

Результаты поиска

Содержание Destiny VFD Series

Отзывы:

Похожие инструкции для Destiny VFD Series

Бренды по названию

Популярные бренды