Daikin CTXJ25RVMAW, Руководство по эксплуатации

Страница: 28 / 44

27
WEEKLY TIMER Operation
NOTE
„
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller fi rst.
Page 10
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set with the WEEKLY TIMER.
When set to ON TIMER mode, operation will begin in the settings used previously for operation mode, temperature, airfl ow rate, and airfl ow direction.
• WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER operation has priority if it is set while
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and “ ” will disappear from the LCD. When the
ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Turning off the circuit breaker, power failure, and other similar events will render operation of the indoor unit’s internal clock inaccurate.
Reset the clock. Page 10
• can be used only for the time and temperature settings. It cannot be used to go back to the reservation number.
6.
Press to select the desired time.
• The time can be set between 0:00 and 23:50 in 10-minute intervals.
• To return to the ON/OFF TIMER mode setting, press .
• Proceed to STEP
9
when setting the OFF TIMER.
7.
Press .
• The time will be set.
• “ ” and the temperature blink.
8.
Press to select the desired temperature.
• The temperature can be set between 10.0°C and 32.0°C.
COOL or AUTO: The unit operates at 18.0°C even if it is set at 10.0°C to 17.0°C.
Page 12
HEAT or AUTO: The unit operates at 30.0°C even if it is set at 31.0°C to 32.0°C. Page 12
• To return to the time setting, press .
• The set temperature is only displayed when the mode setting is on.
9.
Press .
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and blinking of the multi-monitor lamp.
• The multi-monitor lamp blinks twice.
• Temperature and time are set in the case of ON TIMER operation, and the time is set
in the case of OFF TIMER operation.
• The next reservation screen will appear.
• To continue further settings, repeat the procedure from
STEP
4
.
10.
Press to complete the setting.
• “ ” is displayed on the LCD and WEEKLY TIMER operation is activated.
• The TIMER lamp periodically lights orange.
Page 5
The multi-monitor lamp will not light orange if all the reservation settings are deleted.
Display
• A reservation made once can be easily copied and the same settings used for another
day of the week. Refer to
Copy mode
.
Page 28
01_EN_3P472684-1.indd 27 6/13/2017 9:01:45 AM