iom-cliv-eng
www.comfort-flex.com
46
Controller Use
LOYTEC CONTROLLER
The purpose of this manual is to specify the use of the CLIV
equipment with loytec controller, then the use of the main control,
the alarms and the operation of the equipment in general will be
discussed.
As shown in the following image, the loytec controller contains
a display interface, which also contains a web interface. From
the 2 interfaces you can control the equipment depending on the
current configuration and the parameters it contains according to
the operating equipment.
Next is the display, which shows the current status of the controller.
In this case it can show a serial number of the controller, the
current communication configuration, percentage of memory
usage, current internal voltage of the controller.
The dial has the purpose of being able to enter and exit menus, in
this case as a practical example the dial can be manipulated by
turning the knob to the right or to the left; to enter a menu simply
press the dial as a simple button and in this way the desired menu
can be accessed.
The status LED is intended to send
a current status of the controller.
This LED does not always mean that
there is an error inside the controller
but it has 2 statuses:
Color the color green:
Means that the controller is in a healthy state according to the
correct settings programmed to it.
Red LED:
It will indicate if there is any failure in terms of configurations or
hardware problem, in many cases this led does not imply a failure
as such, however this red led indicates a warning which has to be
checked thoroughly in the controller portal.
The following is an example of navigation within the controller,
which is intended to make the use of the dial for menu selection
within the controller more sensitive.
Step number 1: depending on the menu where you are, take the
knob with your index finger and thumb and turn it to the right or to
the left at that moment you will see that the icons or the menu to
which the day is pointing will take a black background.
Example:
This is the main menu on the controller screen, for this practical
example we are going to select the folder icon as you can see,
currently the folder icon is on a white background in this case it
has not been selected and therefore the dial for the folder icon
selection has not been moved.
EXAMPLE OF NAVIGATION WITHIN THE
CONTROLLER MENU.
Taking the above mentioned, turn the dial to the right and the
folder icon will take on a black background color, which means
that the dial has moved to the folder icon and therefore it can be
selected.
Содержание Comfort Flex CLIV Series
