Daikin BRC1E72, Руководство по эксплуатации

Страница: 10 / 148

8 English
Names and Functions
Operation mode 1.
Used to display the current operation ●
mode: Cool, Heat, Vent, Fan, Dry or Auto.
In Auto mode, the actual operation mode
●
(Cool or Heat) will be also displayed.
Operation mode cannot be changed when
●
OFF is displayed.
Operation mode can be changed after
starting operation.
Fan Speed 2.
Used to display the fan speed that is set for ●
the indoor unit.
The fan speed will not be displayed if the
●
connected model does not have fan speed
control functionality.
Setpoint display 3.
Used to display the setpoint for the indoor ●
unit.
Use the Celsius/Fahrenheit item in the
●
main menu to select the temperature unit
(Celsius or Fahrenheit).
Stand by for Defrost/Hot start 4.
“ STANDBY ”
(See page 12.)
If ventilation icon is displayed in this fi eld:
Indicates that an energy recovery ventilator ●
is connected.
For details, refer to the Operation Manual
of the ERV.
Message 5.
The following messages may be
displayed.
“This function is not available”
Displayed for a few seconds when an ●
Operation button is pressed and the indoor
unit does not provide the corresponding
function.
In a remote control group, the message will
●
not appear if at least one of the indoor units
provides the corresponding function.
“Error: Push Menu button”
“Warning: Push Menu button”
Displayed if an error or warning is detected ●
(see page 47) .
“Time to clean fi lter”
“Time to clean element”
“Time to clean
fi lter & element”
Displayed as a reminder when it is time to ●
clean the fi lter or element (see page 45).
Ventilation 6.
Displayed when a energy recovery ●
ventilator is connected.
Ventilation Mode icon.“ ● AUTO
ERV
ERV BYPASS
”
These icons indicate the current ventilation
mode (ERV only) (AUTO, ERV, BYPASS).
Air Purify ICON “ ● AIR
PURIFY
”
This icon indicates that the air purifying unit
(option) in operation.
7. display
(See page 18.)
Displayed when the key lock is set. ●
8. display
(See page 28.)
Displayed if the Schedule or Off timer is ●
enabled.
Under Centralized control “ 9.
CENTRAL
CONTROL
”
Displayed if the system is under the ●
management of a multi-zone controller
(option) and the operation of the system
through the remote controller is limited.
Changeover controlled by the 10.
master indoor unit “
MASTER
CONTROLLED
”
(VRV only)
Displayed when another indoor unit on the ●
system has the authority to change the
operation mode between cool and heat.
01_EN_3P243520-3E.indd 8 01_EN_3P243520-3E.indd 8 9/11/2012 4:12:38 PM 9/11/2012 4:12:38 PM