Daikin BEV2, Руководство по установке для специалистов

Страница: 19 / 40

6 | Unit installation
Installer reference guide
19
BEV2N-A
CO₂ Conveni-Pack: BEV2 unit
4P677928-1 – 2021.10
a Suspension bolt pitch
▪ Hanger bracket . Make sure to support the connection piping around the unit
using hanger brackets installed within 1 meter of the side of the unit. Avoid
putting excessive weight on the hanger bracket; otherwise the unit may fall and
cause injuries.
≤1 m ≤1 m
a
b
e
c
d
a Unit
b Anchor
c Long nut or turnbuckle
d Suspension bolt
e Hanger bracket
6.2.2 To mount the unit
Changing the installation position of the control box
Prerequisite: The position of the control box can be changed if necessary.
180°
2
1
4, 7
3, 8
6
9
10
a b
c
d
b a
5
5
b e e e b e f f f f
a Control box lid
b Control box
c Top panel
d Coil cover
e Wire clip
f Tie wrap
1 Remove the control box lid (2 screws).
2 Remove the control box (2 screws).
3 Remove the top panel (4 screws).
4 Remove the coil cover (1 screw).
5 Change the pull out direction of the wire (motorised valve coil) between the
unit body and the control box.