14
■
To adjust the airflow rate setting
Press .
•
Each pressing of
advances the airflow rate setting in sequence.
Auto
Indoor unit quiet
Low
Middle low
Middle
Middle high
High
•
When the airflow is set to “ ”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
•
In indoor unit quiet operation, the airflow rate is set to a weak level.
•
If the temperature does not reach the desired point in the indoor unit quiet operation,
change the airflow rate setting.
•
In DRY mode, the airflow rate setting is not variable.
NOTE
■
Notes on the angles of the flap
•
The flap swinging range depends on the operation. (See the figure.)
FAN operation
HEAT operation
COOL and
DRY operation
Upper limit
Stop operation
Lower limit
Upper limit
Upper limit
COMFORT AIRFLOW
Stop operation
Stop operation
Lower limit
Lower limit
45°
5°
0°
COMFORT AIRFLOW
15°
45°
50°
0°
45°
5°
0°
•
If the air conditioner is operated in COOL or DRY operation with the flap kept stopped in the downward direction, the flap will automatically
start operating in approximately an hour in order to prevent dew condensation.
■
Note on airflow rate setting
•
At smaller airflow rates, the cooling (heating) effect is also smaller.
CAUTION
•
Always use a remote controller to adjust the angles of the flap. If you attempt to move the flap and louvers forcibly with hand when they are
swinging, the mechanism may be broken.
•
Be careful when adjusting the louvers, since a fan is rotating inside the air outlet at a high speed.
Содержание ATXS20K2V1B
Страница 43: ...42 ...
Страница 44: ...Quick reference 3P377621 3B 2014 08 Copyright 2014 Daikin ...