manualshive.com logo in svg

Daikin ATXS20K2V1B, Руководство по эксплуатации, Страница: 33 / 44

Поделиться
Скачать
Daikin ATXS20K2V1B Скачать руководство пользователя страница 33

32

 CAUTION

• 

When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.

• 

When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.

• 

After cleaning, make sure that the front panel is securely fixed.

1. 

Remove the front panel.

• 

Slide the front panel to either the left or right and 
pulling it toward you.

 

This will disconnect the rotation dowel on one side.

• 

Disconnect the front panel shaft on the other 
side in the same manner.

1) Slide 

2) Pull 

2. 

Clean the front panel.

• 

Wipe it with a soft cloth soaked in water.

• 

Only neutral detergent may be used.

• 

In case of washing the panel with water, wipe it 
with dry soft cloth, dry it up in the shade after 
washing.

3. 

Attach the front panel.

• 

Align the front panel shaft on the left and right of 
the front panel with the slots, then push them all 
the way in.

Front panel shaft

Slot

• 

Close the front panel slowly.

• 

Press the front panel at both sides and the 
center.

 

■

Removing the front panel

Содержание ATXS20K2V1B













































Отзывы:

Нет отзывов