Si121292EC
Coils / Thermistors
Removal Procedure
15
5. Coils / Thermistors
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1. Remove the electronic
expansion valve coils.
1
Pull out the electronic
expansion valve coils.
2. Remove the thermistors.
When reassembling, place
the thermistor so that its
edge comes up to the edge
of the fixture.
Be careful not to lose the
fixtures for the thermistors.
1
Pull out the gas pipe
thermistors.
Electronic
expansion
valve coil
(R10415)
Gas pipe
thermistor
(R17412)
(R18786)
Fixture
Gas pipe
thermistor