SALC-212-174
18
4.3.4 Setting mode
Various kinds of setting are performed. Setting mode is three types, and operations are different.
DISPLAY is pushed in case it returns to the original measurement display. And, if a switch is not operated
for 10 minute after a set point check, it will return to the original measurement display automatically.
Operation and the contents of setting (detail) in setting mode, please refer to "5 Setting".
・Setting mode 1：Press SET for longer than 3 seconds.
・Setting mode 2：Press SET and RESET/SHIFT together for longer than 3 seconds.
・Setting mode 3：Press SET and DISPLAY together for longer than 3 seconds.
<Reference> It can operate by measurement display and maximum (minimum) display.
【Setting mode 2】
Setting factor Setting No.
SET 3 seconds
SET ＋ RESET/SHIFT 3 seconds
SET ＋ DISPLAY 3 seconds
A(V) display
【Setting mode 1】
Setting No.
【Setting mode 3】
Setting No.
A(U) display A(W) display
Measurement display
DISPLAY or
no operation
10 seconds.
Return to
measurement
display.
