Daiichi Electronics FINE Series, Инструкция по эксплуатации

Страница: 5 / 22

FSDLC-220-047
4
(2) Precision Resistance Unit, Type：UR-2 (option)
5.5 φ3.7 0.5 9.5
21.
5
31.3
28
.5
11.2
AWG22 (60mm)
Resistance in input signal
Input
Resistance
DC0‐1mA DC0‐10mA DC0‐16mA DC0‐20mA DC2‐10mA DC4‐20mA DC10‐50mA
10Ω － DC0‐100mV DC0‐160mV DC0‐200mV DC20‐100mV DC40‐200mV
DC100‐500mV
50Ω － － － DC0‐1V DC100‐500mV DC0.2‐1V DC0.5‐2.5V
62.5Ω － － DC0‐1V － － DC0.25‐1.25V －
100Ω DC0‐100mV DC0‐1V － － － DC0.4‐ 2V DC1‐5V
250Ω － － － DC0‐5V － DC1‐5V －
500Ω － DC0‐5V － DC0‐10V DC1‐5V － －
1kΩ DC0‐1V DC0‐10V － － － － －
<How to mount UR-2>
When using UR-2 (resistor module), install it as shown in the figure below.
(3) Mounting base
1 2
3 4
1 2
3 4
UR-2
INPUT
(Voltage input)
Electrical wire
Attach as nameplate surface is
upward.
Attach as the main body case is
downward.
Mounting base
UR-2 combines an alarm setter of voltage input, and please
use it. When open measures are necessary when they change
an alarm setter with hot line condition in current input,
they connect UR-2 to socket, and please use it by voltage
signal.
(UR-2, Specify resistance value)
Socket：Two units of space are required to mount this product.
Input terminal：Wire the input line of the alarm setter.
Auxiliary supply terminal：Wiring for the power supply unit that supplies
Output terminal：Output terminal of alarm setter.
DATE
TP-****
FWBA-16PY-A00 TYPE
the alarm setter and each plug-in transducer.
(Refer to the connection diagram for details)